I1 Display 3 Driver

1. Xrite I1 Display Windows 10
2. I1 Display 3 Drivers
3. I1 Display 3 Driver
4. I1 Display 3 Driver Wacom
5. I1 Display 3 Driver Windows 7

The driver installed first (manually) was i1Display which grumbled about not being certified bla bla. It's worth noting that the device driver icon changed from having the yellow warning to having a question mark instead, and was just a generic device shape, rather than the final eye-one 'mouse-shape' of the GMB sensor. License Agreement For i1Profiler 1.6.3 (as of 4/8/2016) License Agreement for i1Profiler 1.1.1 (as of 6/28/2011) Monitor Profile Unloading on Windows 7, Windows 8, Windows 10; Monitor Shows Very Little Change After Calibration; Mouse Clicks Don't Work With Wacom Tablets; OEM i1Display.

Remove the DVD, plug in the i1Display Pro measurement device, and the driver will install automatically. After the driver is installed, open the program by going to: Windows Start X-Rite i1Profiler i1Profiler. The software registration window will open. Depending upon the system you purchased, your i1 is designed to run of these two programs: - i1 Match 3.6.2 (PC), 3.6.3(MAC) - ProfileMaker 5 (i1 Pro Bundle only) for profiling And these utilities Programs: - i1 Share 1.4, an unsupported freeware program for color evaluation - i1. I1 Monitor, i1 Pro, i1 Pro2, i1 Display, i1 Display 2, i1 Display 3, i1 Display Pro: Ambient light adjustment is not available with the i1 Monitor and i1 Display. ColorMunki PHOTO, ColorMunki DESIGN: ColorMunki Display and ColorMunki Smile are not supported. Datacolor: Spyder3, Spyder4, Spyder5.

Calibrate and characterize your display devices using one of many supported measurement instruments, with support for multi-display setups and a variety of available options for advanced users, such as verification and reporting functionality to evaluate ICC profiles and display devices, creating video 3D LUTs, as well as optional CIECAM02 gamut mapping to take into account varying viewing conditions.

At its core it relies on ArgyllCMS, an advanced open source color management system, to take measurements, create calibrations and profiles, and for a variety of other advanced color related tasks.

Other features include:

• Support of colorimeter corrections for different display device types to increase the absolute accuracy of colorimeters. Corrections can be imported from vendor software or created from measurements if a spectrometer is available.
• Check display device uniformity via measurements.
• Test chart editor: Create charts with any amount and composition of color patches, easy copy & paste from CGATS, CSV files (only tab-delimited) and spreadsheet applications, for profile verification and evaluation.
• Create synthetic ICC profiles with custom primaries, white- and blackpoint as well as tone response for use as working spaces or source profiles in device linking (3D LUT) transforms.

DisplayCAL is developed and maintained by Florian Höch, and would not be possible without ArgyllCMS, which is developed and maintained by Graeme W. Gill.

System requirements and other prerequisites

General system requirements

• A recent Linux, macOS (10.6 or newer, recommended 10.7 or newer) or Windows (recommended Windows 7 or newer) operating system.
• “True color” 24 bits per pixel or higher graphics output.

Hardware requirements

• Minimum: 1 GHz single core processor, 1.5 GB RAM, 500 MB free storage space.
• Recommended: 2 GHz dual core processor or better, 4 GB RAM or more, 1 GB free storage space or more.

ArgyllCMS

• To use DisplayCAL, you need to download and install ArgyllCMS (1.0 or newer).

Supported instruments

You need one of the supported instruments to make measurements. All instruments supported by ArgyllCMS are also supported by DisplayCAL. For display readings, these currently are:

Colorimeters

• CalMAN X2 (treated as i1 Display 2)
• Datacolor/ColorVision Spyder2
• Datacolor Spyder3 (since ArgyllCMS 1.1.0)
• Datacolor Spyder4 (since ArgyllCMS 1.3.6)
• Datacolor Spyder5 (since ArgyllCMS 1.7.0)
• Datacolor SpyderX (since ArgyllCMS 2.1.0)
• Hughski ColorHug (Linux support since ArgyllCMS 1.3.6, Windows support with newest ColorHug firmware since ArgyllCMS 1.5.0, fully functional Mac OS X support since ArgyllCMS 1.6.2)
• Hughski ColorHug2 (since ArgyllCMS 1.7.0)
• Image Engineering EX1 (since ArgyllCMS 1.8.0)
• Klein K10-A (since ArgyllCMS 1.7.0. The K-1, K-8 and K-10 are also reported to work)
• Lacie Blue Eye (treated as i1 Display 2)
• Sencore ColorPro III, IV & V (treated as i1 Display 1)
• Sequel Imaging MonacoOPTIX/Chroma 4 (treated as i1 Display 1)
• X-Rite Chroma 5 (treated as i1 Display 1)
• X-Rite ColorMunki Create (treated as i1 Display 2)
• X-Rite ColorMunki Smile (since ArgyllCMS 1.5.0)
• X-Rite DTP92
• X-Rite DTP94
• X-Rite/GretagMacbeth/Pantone Huey
• X-Rite/GretagMacbeth i1 Display 1
• X-Rite/GretagMacbeth i1 Display 2/LT (the HP DreamColor/Advanced Profiling Solution versions of the instrument are also reported to work)
• X-Rite i1 Display Pro, ColorMunki Display (since ArgyllCMS 1.3.4. The HP DreamColor, NEC SpectraSensor Pro and SpectraCal C6 versions of the instrument are also reported to work)

Spectrometers

• JETI specbos 1211/1201 (since ArgyllCMS 1.6.0)
• JETI spectraval 1511/1501 (since ArgyllCMS 1.9.0)
• X-Rite ColorMunki Design/Photo (since ArgyllCMS 1.1.0)
• X-Rite/GretagMacbeth i1 Monitor (since ArgyllCMS 1.0.3)
• X-Rite/GretagMacbeth i1 Pro (the EFI ES-1000 version of the instrument is also reported to work)
• X-Rite i1 Pro 2 (since ArgyllCMS 1.5.0)
• X-Rite/GretagMacbeth Spectrolino
• X-Rite i1Studio (since ArgyllCMS 2.0)

Unpacking the .zip archive:

You will need to unzip the downloaded file in the location you have chosen to hold the executable files (perhaps somewhere like bin). I would NOT put them in Program Files, since spaces in directory or file names and command line environments are a very bad mix, and will cause you endless problems. The archive will create a top level directory Argyll_VX.X.X, where X.X.X is the version number, and the executables will be in Argyll_VX.X.Xbin.

Making the tools accessible:

You should also configure your %PATH% environment variable to give access to the executables from your command line environment.
For Windows 8, 8.1 & 10, look in
Desktop -> Settings -> Control Panel -> System And Security -> System -> Advanced System Settings -> Environment Variables
For Windows 7, look in
Start Menu -> Control Panel -> System And Security -> System -> Change Settings -> Advanced -> Environment Variables
For Vista, look in
Start Menu -> Control Panel -> System And Maintenance -> System -> Change Settings -> Advanced -> Environment Variables
For XP and 2000 look in
Start->Settings->Control Panel->System->Advanced->Environment Variables
For NT 4 look in
Start->Settings->Control Panel->System->Environment
You want to add the directory you've chosen to your %PATH%, which is a System Variable. Normally you would add this to the end of the current setting, separated by a ';'.
So if the current value of PATH is '%SystemRoot%system32;%SystemRoot%' and you unpacked Argyll version 1.8.0 in d:bin, then you would modify PATH to be '%SystemRoot%system32;%SystemRoot%;d:binArgyll_V1.8.0bin', - i.e. you append the path to the Argyll binaries to your PATH, separated by the ';' character. The change will take effect when you start a new command shell, which you start from Start Menu->Accessories->Command Prompt, or Start Menu->Programs->Accessories->Command Prompt. You can check that the environment variable has been set by running the command 'echo %PATH%' in the command shell.
The .zip file also contains several useful reference files (such as scanner chart recognition templates, sample illumination spectrum etc.) in the ref sub-directory, all the current documentation in a doc sub-directory, and instrument USB drivers in the usb directory.
NOTE: Vista 64/Windows 7, 8,8.1 & 10 64 bit and Beep prompt: Microsoft (in its infinite wisdom) has removed the built in speaker driver, and now relies on systems having a sound card and speakers's installed and turned on to hear system beeps. So if you're wondering where the beeps have gone when using chartread, now you know.
NOTE: Microsofts generic VGA Driver does not appear to support setting the display VideoLUTs. You will need to install a display driver for your specific display hardware to enable this. Note that it is possible in many cases to use Windows 7 video drivers on Windows 8 systems.

NOTE that if you wish to use Argyll tools (dispwin) to control display calibration, that you will have to disable any other display calibration loader programs.
There are other programs that will interfere with calibration loading, such as igfxpers.exe that gets installed with nVidia 'Optimus' technology.
You may have to disable both the igfx tray module (c:windowssystem32igfxtray.exe) and the igfxpph Module (c:windowssystem32igfxpph.dll) in addition to the persistence Module (c:windowssystem32igfxpers.exe).
A good tool for this is AutoRuns. Note that the igfxpph module may exist in several locations and you have to disable all of them. Reboot after changing settings.

Serial Instruments:

If you are using a serial connected instrument, then there is nothing special to do to enable this.

USB Instruments:

If you are using a USB connected instrument, then suitable USB system drivers may need to be installed.

Note that the Huey, i1 Display Pro, ColorMunki Display and ColorHug colorimeter appears as an HID (USB Human Interface Device Class) device, and hence will be assigned to the default MSWindows HID driver. You therefore don't need to install an Argyll usb system driver for these instruments, although it is possible to select the libusb0.sys driver as an alternative to the default HID driver.
If you are using the JETI specbos 1211, 1201, 1511, 1501 and the Klien K10A then you may need to install the FTDI Virtual COM Port Drivers (VCP), if they are not already on your system. You may have to update to the latest FTDI driver to work with the FTDI FT231XS chip that the JETI

Xrite I1 Display Windows 10

specbos 1511, 1501 use.
Jump to your operating system version:
Windows 8, 8.1 & 10
Windows 7
Windows Vista
Windows XP
Windows 2000
Windows 8, 8.1 & 10
Fresh Install of Instrument USB driver:
If you currently don't have any applications that talk to your instrument using USB, then it is relatively simple to use the drivers provided with Argyll, since you don't have to deal with the instrument already having an assigned driver.
Windows 8/8.1/10 does not automatically pop up a 'New Hardware' dialog, so you will have to open the Device Manager manually, and you will also have to temporarily disable UBS driver .inf signature enforcement.
Please NOTE that on some versions of Windows 10, you may have to temporarily disable secure boot in your UEFI BIOS to be able to Disable Driver Signature Enforcement.
To install the Argyll driver for the first instrument:
Settings -> Power -> Hold Shift Key down and click 'Restart' -> Troubleshoot -> Advanced Options -> Startup Settings -> Restart ->
(After Reboot) -> 'Disable Driver Signature Enforcement' (number 7 on the list)
(After system starts, Plug in instrument)
Desktop -> Settings -> Control Panel -> Hardware and Sound -> Device Manager ->
Other Devices -> <instrument being installed> -> right click -> Update Driver Software... -> Browse my computer for driver software -> Browse...
-> argyllusb folder -> Next -> Install this driver software anyway -> Close
On subsequent installation of other supported instrument types:
Simply plug the instrument in. The Argyll driver will be automatically selected.
Using Argyll drivers with existing OEM drivers:
If you currently have applications other than Argyll accessing your USB connected instrument, then you will have to manually install the Argyll driver, and then switch back and forth between the Argyll and other drivers if you want to switch between applications.
To install the Argyll Driver:
Settings -> Power -> Hold Shift Key down and click 'Restart' -> Troubleshoot -> Advanced Options -> Startup Settings -> Restart ->
(After Reboot) -> Disable Driver Signature Enforcement' (number 7 on the list)
(After system starts, Plug in instrument)
Desktop -> Settings -> Control Panel -> Hardware and Sound -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Update Driver Software... -> let me pick from a list of device drivers on my computer -> Have disk... -> Browse...
-> argyllusb folder -> select ArgyllCMS.inf -> Open -> OK -> Install this driver software anyway -> Close
To switch between drivers:
(Plug in the instrument)
Desktop -> Settings -> Control Panel -> Hardware and Sound -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Update Driver Software... -> let me pick from a list of device drivers on my computer
(Choose either the Argyll driver or another driver from the list)
-> Next -> Close
Un-installing Argyll driver:
If you are updating to a new version of Argyll which adds support for a new instrument that you want to use, then it may be necessary to uninstall all the existing Argyll USB driver and do a fresh re-install to update the relevant libusb system driver and .inf file. (This is true for updating to Argyll Version 2.0.0).
(Plug in the instrument)
Desktop -> Settings -> Control Panel -> Hardware and Sound -> Device Manager
(Locate the instrument in the device list. It will be underneath the Argyll LibUSB-win32 devices top level item.)
Right click on instrument -> Uninstall -> click 'Delete the driver software for this device' -> OK
Proceed then with either Fresh Install of Argyll USB driver or Adding Argyll drivers to existing drivers above.
Windows Vista & Windows 7
Fresh Install of Instrument USB driver:
If you currently don't have any applications that talk to your instrument using USB, then it is relatively simple to use the drivers provided with Argyll since you don't have to deal with the instrument already having an assigned driver.
To install the Argyll driver for the first instrument:
(Plug in instrument)
(Wait for the 'Found New Hardware' or 'Installing new device driver software - Device driver software was not successfully installed' popup and dismiss it)
Start -> Control Panel -> Hardware and Sound -> Device Manager ->
Other Devices -> <instrument being installed> -> right click -> Update Driver Software... -> Browse my computer for driver software -> Browse...
-> argyllusb folder -> Next -> Install this driver software anyway -> Close
On subsequent installation of other instrument types:
Simply plug the instrument in. The Argyll driver will be automatically installed.
Using Argyll drivers with existing OEM drivers:
If you currently have applications other than Argyll accessing your USB connected instrument, then you will have to manually install the Argyll driver, and then switch back and forth between the Argyll and other drivers if you want to switch between applications.
To install the Argyll Driver:
(Plug in instrument)
Start -> Control Panel -> Hardware and Sound -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Update Driver Software... -> let me pick from a list of device drivers on my computer -> Have disk... -> Browse...
-> argyllusb folder -> select ArgyllCMS.inf -> Open -> OK -> Install this driver software anyway -> Close
To switch between drivers:
(Plug in the instrument)
Start -> Control Panel -> Hardware and Sound -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Update Driver Software... -> let me pick from a list of device drivers on my computer
(Choose either the Argyll driver or another driver from the list)
-> Next -> Close
Un-installing Argyll driver:
If you are updating to a new version of Argyll which adds support for a new instrument that you want to use, then it may be necessary to uninstall all the existing Argyll USB driver and do a fresh re-install to update the relevant libusb system driver and .inf file. (This is true for updating to Argyll Version 2.0.0).
(Plug in the instrument)
Start -> Control Panel -> Hardware and Sound -> Device Manager
(Locate the instrument in the device list. It will be underneath the Argyll LibUSB-win32 devices top level item.)

I1 Display 3 Drivers

Right click on instrument -> Uninstall -> click 'Delete the driver software for this device' -> OK
Proceed then with either Fresh Install of Argyll USB driver or Adding Argyll drivers to existing drivers above.
Windows XP
Fresh Install of Instrument USB driver:
If you currently don't have any applications that talk to your instrument using USB, then it is relatively simple to use the drivers provided with Argyll since you don't have to deal with the instrument already having an assigned driver.
To install the Argyll driver for the first instrument:
(Plug in instrument)
(Wait for the 'Welcome to the Found New Hardware Wizard' popups and dismiss it)
My Computer, Right Click -> Manage -> Device Manager
Other Devices -> <instrument being installed> -> right click -> Update Driver... -> No, not this time -> Next
->Install from a list or specific location (Advanced) -> Next -> Don't search. I will choose the driver to install -> Next
-> Have Disk... -> Browse -> argyllusb folder -> ArgyllCMS.inf -> Open -> OK -> Next -> Finish
On subsequent installation of other instrument types:
(Plug the instrument in, and wait for the 'Welcome to the Found New Hardware Wizard' to pop up.)
No, not this time -> Install the software automatically (Recommended) -> Next -> Finish
Using Argyll drivers with existing OEM drivers:
If you currently have applications other than Argyll accessing your USB connected instrument, then you will have to manually install the Argyll driver, and then switch back and forth between the Argyll and other drivers if you want to switch between applications.
To install the Argyll Driver:
(Plug in instrument)
My Computer, Right Click -> Manage -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> right click -> Update Driver... -> No, not this time -> Next
->Install from a list or specific location (Advanced) -> Next -> Don't search. I will choose the driver to install -> Next
-> Have Disk... -> Browse -> argyllusb folder -> ArgyllCMS.inf -> Open -> OK -> Next -> Finish
To switch between drivers:
(Plug in the instrument)
My Computer, Right Click -> Manage -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Update Driver... -> No, not this time -> Next
->Install from a list or specific location (Advanced) -> Next -> Don't search. I will choose the driver to install -> Next
->let me pick from a list of device drivers on my computer
(Choose either the Argyll driver or another driver from the list)
-> Next -> Finish
Un-installing Argyll driver:
If you are updating to a new version of Argyll which adds support for a new instrument that you want to use, then it may be necessary to uninstall all the existing Argyll USB driver and do a fresh re-install to update the relevant libusb system driver and .inf file. (This is true for updating to Argyll Version 2.0.0).
(Plug in the instrument)
My Computer, Right Click -> Manage -> Device Manager
(Locate the instrument in the device list. It will be underneath the Argyll LibUSB-win32 devices top level item.)
Right click on instrument -> Uninstall -> click 'Delete the driver software for this device' -> OK
Then you will have to delete the cached copy of the old Argyll driver .inf files, that MSWindows keeps.
cd to where Windows keeps it's cached driver information files, ie:
c:
cd windowsinf
identify all the system copies of the Argyll .inf files:
find /I 'ArgyllCMS' oem*.inf
then delete just the files that contain 'ArgyllCMS':
del /F oemXXX.inf

I1 Display 3 Driver

del /F oemXXY.inf
etc.
Proceed then with either Fresh Install of Argyll USB driver or Adding Argyll drivers to existing drivers above.
Windows 2000
Fresh Install of Instrument USB driver:
If you currently don't have any applications that talk to your instrument using USB, then it is relatively simple to use the drivers provided with Argyll since you don't have to deal with the instrument already having an assigned driver.
To install the Argyll driver for the first instrument:
(Plug in instrument)
(Wait for the 'Welcome to the Found New Hardware Wizard' pops up) -> Next
-> Search for a suitable driver for my device (recommended) -> Next -> Specify a location -> Next
-> Browse -> argyllusb folder -> ArgyllCMS.inf -> Open -> OK -> Next -> Finish
On subsequent installation of other instrument types:

I1 Display 3 Driver Wacom

Simply plug the instrument in. The Argyll driver will be automatically installed.
Using Argyll drivers with existing OEM drivers:
If you currently have applications other than Argyll accessing your USB connected instrument, then you will have to manually install the Argyll driver, and then switch back and forth between the Argyll and other drivers if you want to switch between applications.
To install the Argyll Driver:
(Plug in instrument)
My Computer, Right Click -> Manage -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Properties -> Driver -> Update Driver this time
-> 'Welcome to the Found New Hardware Wizard' -> Next -> Display a list of known drivers for this device so that I can choose a specific driver -> Next
-> Have Disk -> Browse -> argyllusb folder -> ArgyllCMS.inf -> Open -> OK -> Next -> Next -> Finish
To switch between drivers:
(Plug in instrument)
My Computer, Right Click -> Manage -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Properties -> Driver -> Update Driver... -> Next
-> Display a list of known drivers for this device so that I can choose a specific driver -> Next
(Choose either the Argyll driver or another driver from the list)
-> Next -> Next -> Finish
Un-installing Argyll driver:
If you are updating to a new version of Argyll which adds support for a new instrument that you want to use, then it may be necessary to uninstall all the existing Argyll USB driver and do a fresh re-install to update the relevant libusb system driver and .inf file. (This is true for updating to Argyll Version 2.0.0).
(Plug in the instrument)

I1 Display 3 Driver Windows 7

My Computer, Right Click -> Manage -> Device Manager
(Locate the instrument in the device list. It may be underneath one of the top level items.)
Right click on instrument -> Uninstall -> OK
Then you will have to delete the cached copy of the old Argyll driver .inf files, that MSWindows keeps.
cd to where Windows keeps it's cached driver information files, ie:
c:
cd winntinf
identify all the system copies of the Argyll .inf files:
find /I 'ArgyllCMS' oem*.inf
then delete just the files that contain 'ArgyllCMS':
del /F oemXXX.inf
del /F oemXXY.inf
etc.
Proceed then with either Fresh Install of Argyll USB driver or Adding Argyll drivers to existing drivers above.